High accuracy of dividing scale, flexible setting
As main ram, knife and dividing block are independent drive,
dough pressurization, suction and strokes are changeable.
Timing of component and dividing mode can be changed
with the programming according to dough and machine speeds.
Longer life
Front plate of dough chamber and bottom plate can be easily replaced.
Dividing unit runs without contacting sliding surface.
The dough chamber is replaceable as the unit.
Oil amount of distributor for divider oil can adjust oil amount at each lubricating point.
Easy Cleaning
All motors are located outside of frame and drives,
dough chamber is completely separated.
Main ram and top knife with cleaning auxiliary unit are easy to clean back sides.
The conveyor belt is removed by one-touch.
Oil reclaim box is installed at rear of dough chamber and front of machine.
The back side of flicker plate can also be cleaned.
Exterior has see-through covers.
Easy Maintenance
50% less lubrication points.
Message for lubrication frequency is displayed at operation panel.
The conveyor is removed by one-touch.
Torque limiter is used instead of shear pin.
Gyratory Rounder (RGH)
The volume of dough becomes larger with less dough damages.
No dough leakage as dough pieces are rounded by eccentric movement when intermittent moving rounder belt is stopped.
There is not heat due to no friction with metal as umbrella and bar typed rounders and cooling facility is not required.
Doubled dough pieces and proofer empty trays are removed by electrical interlocking with the divider.
Gyratory cups are selected from 5 kinds of cups and can replaced with one-touch.
Tightness of rounding can be adjustable with changing the number of revolution and height of cups.
